Install the latest firmware for your Riva Concert or Stadium

Last Updated: 01/02/2024

Please Note: To do a firmware update, you must have your device connected to the network to do a Firmware update

Riva Concert and Stadium Firmware Update Instructions

How to Update the Firmware for the Riva Concert:

  • Initial Setup:

    • Connect the Riva-Concert to the power supply.

    • Observe the LED on the Riva-Concert. It will start blinking blue and eventually turn white once the booting process is complete.

  • Connecting to the Network:

    • When the white LED blinks slowly, it indicates that the Riva-Concert is discoverable and ready to be connected to the network.

    • Your Apple device should be connected to the same network your speaker will be connected to.

    • On your Apple device go to "Wi Fi" settings. Riva Concert XXXXXX will appear as,” Set up New Airplay Speaker”, Below the “NETWORKS” list.

    • Connect the "Riva-Concert" to your Wi Fi network using the (Airplay) method.

    • If the white LED stops blinking and remains solid white, this means the Riva-Concert has successfully connected to the network.

  • Troubleshooting Connection Issues:

    • If you face any issues with the Wi Fi network connection, or if the WAC (Airplay) fails to detect the Riva-Concert:

      • Press and hold the indicated buttons (Back arrows button and center button) simultaneously.

      • Wait for the blue LED to blink.

      • This action will restore the Riva-Concert to its factory settings and reboot the device.

      • After the reboot, try connecting to the network again.

  • Finding the IP Address of Riva-Concert:

  • Method 1

    Open the RIVA VOICE app. and select the “Gear icon”, you will find IP address for RIVA speaker.

  • Method 2

    • Open Google Chrome on your laptop.

    • Enter your router's management address in the URL bar (ensure your laptop is on the same network as the Riva-Concert).

    • Browse through the router's web page to locate the IP address of the Riva-Concert.

    Method 3:

    • Download the "Discovery APP" on your Apple device.

    • Launch the app and use it to find the IP address of the Riva-Concert. Ensure your Apple device is connected to the same network as the Riva-Concert.

  • Updating the Firmware:

    • Open Google Chrome.

    • Enter the IP address of the Riva Concert or Stadium in the URL bar.

    • This will take you to the web page for a firmware update

    • Click “Upgrade”

    • Click “Choose File” and select the appropriate File and click “Ok”

    • Under “Factory Reset”, click “Update” and click “Ok” to confirm

    • Follow the on-screen instructions to update the firmware for Riva-Concert.

    • Once the update is successful, the Riva-Concert will automatically reboot.

Please Note: If something in the update process goes wrong, it can brick the speaker. Please proceed with caution and diligence when using this process.

If you have any questions or need additional assistance, please contact support.